The cross stick of the grating is the rod Ø6, Ø8 or Ø6 twisted. These developments allow greater payload grids with lower own weight. According to customer request we supply the gride :
At the request we puts the finishing tape. In the case the length oft he grid is considered along with the trimmings. A typical data grid floor ALPO are shown int he tables
CAPACITY OF THE GRID FOR THE CONCENTRATED LOAD
Ordinal numb. | Suporting lamella
h*b[mm] |
Flange Ø mm
fi mm |
Weight (kg/m2) | Spacing of supports T [mm] | |||||||||||
400 | 500 | 600 | 700 | 800 | 900 | 1000 | 1200 | 1400 | |||||||
PA | PB | PC | Permitted cocentrated load Q(kN) on the suface | ||||||||||||
Prioritet.
dim. |
20 | 25*2 | 6 | 16,6 | 15,2 | 18,1 | 2,1 | 1,6 | 1,3 | 1,1 | 0,9 | ||||
21 | 25*3 | 6 | 22,7 | 21,3 | 24,2 | 3,2 | 2,4 | 1,9 | 1,6 | 1,4 | 1,2 | 1,1 | 0,9 | ||
22 | 30*2 | 6 | 19,0 | 17,5 | 20,5 | 3,1 | 2,3 | 1,9 | 1,6 | 1,4 | 1,2 | 1,1 | 0,9 | ||
23 | 30*3 | 6 | 26,3 | 24,8 | 27,8 | 4,7 | 3,5 | 2,8 | 2,4 | 2 | 1,8 | 1,6 | 1,3 | 1,1 | |
24 | 40*2 | 6 | 23,9 | 22,4 | 25,4 | 6,1 | 4,5 | 3,6 | 3 | 2,6 | 2,3 | 2 | 1,7 | 1,4 | |
25 | 40*3 | 6 | 33,6 | 32,1 | 35,1 | 9,1 | 6,9 | 5,5 | 4,6 | 3,9 | 3,4 | 3 | 2,5 | 2,1 | |
Special
dim. |
26 | 25*2,5 | 6 | 19,6 | 18,2 | 21,1 | 2,6 | 2 | 1,6 | 1,3 | 1,1 | 1 | 0,9 | ||
27 | 30*2,5 | 6 | 22,8 | 21,3 | 24,3 | 3,9 | 2,9 | 2,3 | 2 | 1,7 | 1,5 | 1,3 | 1,1 | 0,9 | |
28 | 40*2,5 | 6 | 28,8 | 27,3 | 30,3 | 7,6 | 5,7 | 4,5 | 3,8 | 3,2 | 2,8 | 2,5 | 2,1 | 1,7 | |
29 | 50*3 | 8 | 44,5 | 41,9 | 47,2 | 14 | 10,5 | 8,4 | 7 | 6 | 5,2 | 4,7 | 3,8 | 3,2 | |
30 | 50*4 | 8 | 56,6 | 54,0 | 59,3 | 18,7 | 14 | 11,2 | 9,3 | 8 | 7 | 6,2 | 5,1 | 4,3 | |
31 | 60*4 | 8 | 66,4 | 63,7 | 70,0 | 28,1 | 21,1 | 16,9 | 14 | 12 | 10,5 | 9,4 | 7,7 | 6,5 | |
32 | 60*5 | 8 | 81,1 | 78,4 | 83,8 | 35,2 | 26,4 | 21,1 | 17,6 | 15,1 | 13,2 | 11,7 | 9,6 | 8,1 |
CAPACITY OF THE GRID FOR THE CONTINUOUSLY LOAD
Ordinal numb. | Suporting lamella
h*b[mm] |
Allowable bending moment
[kN m/m] |
Spacing of supports [mm] | ||||||||||||
500 | 600 | 700 | 800 | 900 | 1000 | 1200 | 1400 | 1600 | 1800 | 2000 | 2200 | 2400 | |||
Permitted continuously load q(kN/m²) on the suface | |||||||||||||||
20 | 25*2 | 0,644 | 20,6 | 14,3 | 10,5 | 8,0 | 6,4 | 5,1 | 3,6 | 2,6 | 2,0 | ||||
21 | 25*3 | 0,966 | 30,9 | 21,5 | 15,8 | 12,1 | 9,5 | 7,7 | 5,4 | 3,9 | 3,0 | ||||
22 | 30*2 | 0,938 | 30,0 | 20,8 | 15,3 | 11,7 | 9,3 | 7,5 | 5,2 | 3,8 | 2,9 | 2,3 | |||
23 | 30*3 | 1,414 | 45,2 | 31,4 | 23,1 | 17,7 | 14,0 | 11,3 | 7,8 | 5,8 | 4,4 | 3,5 | |||
24 | 40*2 | 1,82 | 58,2 | 40,4 | 29,7 | 22,7 | 18,0 | 14,6 | 10,1 | 7,4 | 5,7 | 4,5 | 3,6 | 3,0 | 2,5 |
25 | 40*3 | 2,744 | 87,8 | 61,0 | 44,8 | 34,3 | 27,1 | 22,0 | 15,2 | 11,2 | 8,6 | 6,8 | 5,5 | 4,5 | 3,8 |
26 | 25*2,5 | 0,793 | 25,5 | 17,7 | 13,0 | 10,0 | 7,9 | 6,4 | 4,4 | 3,2 | 2,5 | ||||
27 | 30*2,5 | 1,176 | 37,6 | 26,1 | 19,2 | 14,7 | 11,6 | 9,4 | 6,5 | 4,8 | 3,7 | 2,9 | |||
28 | 40*2,5 | 2,268 | 72,6 | 50,4 | 37,0 | 28,3 | 22,4 | 18,1 | 12,6 | 9,2 | 7,1 | 5,6 | 4,5 | 3,7 | 3,1 |
29 | 50*3 | 4,2 | 134,4 | 93,3 | 68,6 | 52,5 | 41,5 | 33,6 | 23,3 | 17,1 | 13,1 | 10,4 | 8,4 | 6,9 | 5,8 |
30 | 50*4 | 5,6 | 179,2 | 124,4 | 91,4 | 70,0 | 55,3 | 44,8 | 31,1 | 22,8 | 17,5 | 13,8 | 11,2 | 9,2 | 7,8 |
31 | 60*4 | 8,44 | 270,1 | 187,6 | 137,8 | 105,5 | 83,4 | 67,5 | 46,9 | 34,4 | 26,4 | 20,8 | 16,9 | 13,9 | 11,7 |
32 | 60*5 | 10,56 | 337,8 | 234,6 | 172,3 | 132,0 | 104,3 | 84,5 | 58,7 | 43,1 | 33,0 | 26,1 | 21,1 | 17,4 | 14,7 |
(The mass of the grid is given for performance without the trimmings and without surface protection.)
Permitted cocentrated load Q(kN) and Permitted continuously load q(kN/m²) is staded with allowed stress 140 N / mm